メインコンテンツにスキップ

iPhone 4 Verizon Dock Connector Cable Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての11個のガイドに反映されます。

英語
日本語

手順 5を翻訳中

手順5
iPhone 4 Verizon Dock Connector Cable Replacement: 手順 0、 2の画像 1 iPhone 4 Verizon Dock Connector Cable Replacement: 手順 0、 2の画像 2
  • Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.

  • De-route the cellular antenna cable out from under the metal fingers attached to the logic board.

  • When reconnecting the antenna wire be VERY certain that the round connector at the end of the wire is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connector.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります