iRobot Roomba 650 Side Brush and Bottom Panel Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語

日本語

手順 2を翻訳中

手順2

Bottom Panel Removal

Unscrew the four screws that hold the bottom panel using the Phillips 02 screwdriver.
The screws will not come out of the bottom panel. They were designed to become loose but not be removed. This prevents you from losing them, and prevents the Roomba from sucking them up if they came out during cleaning.
Once you are sure that all the screws have been loosened as much as possible, then lift the bottom panel up off the Roomba.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。