メインコンテンツにスキップ

iPhone 5s の正面カメラとセンサーケーブルの交換

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 3を翻訳中

手順3
iPhone 5s Front Facing Camera and Sensor Cable  Replacement: 手順 0、 2の画像 1 iPhone 5s Front Facing Camera and Sensor Cable  Replacement: 手順 0、 2の画像 2
  • In order to ensure a good fit and proper placement of components, make sure your new cable assembly matches the one that came out of your iPhone.

  • You may need to use a set of tweezers to fold the microphone portion of the cable so that the gold portion is inside the cable, and the silver unit is on top.

コンポーネントを適切な場所に正しく装着できたかどうか確認するには、iPhoneから取り出した古いケーブルアセンブリが新しく交換するケーブルアセンブリと一致するか合わせてください。

ケーブルのマイク部分を折り曲げるにはピンセットが必要になるかもしれません。ゴールド部分はケーブルの内側に、シルバーのユニットは上部に配置します。

[* icon_note] In order to ensure a good fit and proper placement of components, make sure your new cable assembly matches the one that came out of your iPhone.
-[* black] You may need to use a set of tweezers to fold the microphone portion of the cable so that the gold portion is inside the cable, and the silver unit is on top.
+[* black] You may need to use a set of [product|IF145-020|tweezers] to fold the microphone portion of the cable so that the gold portion is inside the cable, and the silver unit is on top.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります