Power Mac G5 Processor and Cooling Unit Replacement

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

ガイドに戻る

英語

日本語

前の手順次の手順

手順 2を翻訳中

手順2

Power Mac G5 Processor and Cooling Unit Replacement: 手順 0、 3の画像 1

Power Mac G5 Processor and Cooling Unit Replacement: 手順 0、 3の画像 2

Power Mac G5 Processor and Cooling Unit Replacement: 手順 0、 3の画像 3

Unscrew 8 T10 screws from the cooling unit. NOTE: these screws are acctually allen keys. The prefered tool will be long handled allen keys. t10 are 2.74mm (closest allen key is 2.5 or 3mm) and t15 are 3.27mm(closest allen key is 3mm and 4mm). You may strip your tool or the actual screws themselves. Use a set of high quality long handled allen keys.
The screws are somewhat hidden, so they cannot be see in the picture.
To visualize the location of the screws look 3 steps ahead.
The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.
The last two images show another version of the LCS (out of the computer) in the G5 with off-center views to show the 8 screw holes.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。