Dell Precision T3400 CPU Replacement

英語

日本語

手順 6を翻訳中

手順6

Reinstall the Heat-Sink Assembly

Place the heat-sink assembly back on its hinges.
Pivot the heat-sink assembly back to its original position and secure it with the two screws removed earlier.
Replace the floppy drive's ribbon cable (if you have one).
NOTE: Be sure the heat-sink assembly is seated properly and secured tightly. If it is loose or uneven, it cannot absorb heat properly and could cause your PC to unexpectedly shut down to prevent overheating.
Clean the heat sink before reassembly

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。