メインコンテンツにスキップ

iPhone 16 背面ガラスの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。

英語
日本語

手順 7を翻訳中

手順7
iPhone 16 Back Glass Removal, Back glass information: 手順 0、 1の画像 1
Back glass information
  • As you slice the adhesive securing the back glass in the following steps, don't insert your pick deeper than 3 mm to avoid damaging the following areas:

  • A delicate cable connecting the back glass to the phone, right next to the volume down button. Don't insert your pick here to avoid slicing the cable.

  • Multiple spring contacts around the perimeter of the phone.

次の手順でバックガラスを固定している接着剤を剥がす際に、以下の部分を破損しないように、オープニングピックを3mm以上深く差し込まないでください。

バックガラスとデバイス本体を接続する繊細なケーブル(音量ダウンボタンのすぐ隣)があります。ケーブルを傷つけないよう、この場所にピックを差し込まないでください。

デバイス周囲にある複数のバネコンタクト。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります