メインコンテンツにスキップ

iPhone 16 ペンタローブネジの取り外し

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
iPhone 16 Pentalobe Screws Removal, Before you begin: 手順 0、 2の画像 1 iPhone 16 Pentalobe Screws Removal, Before you begin: 手順 0、 2の画像 2
Before you begin
  • Allow your phone's battery to drain below 25%, as a charged lithium-ion battery is a potential safety hazard.

  • Unplug any cables from your phone.

  • Hold the power and either volume buttons and slide to power off your phone.

充電済みのリチウムイオンバッテリーは潜在的な安全上の危険性があるため、スマートフォンのバッテリー残量を25%以下にします。

スマートフォンからケーブルをすべて取り外します

電源ボタンと音量ボタンのいずれかをホールドスイッチにして、スマートフォンをスライドさせて電源を切ります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります