手順 28を翻訳中
手順28
Reattach buffer boards and T-Con
-
Screw holes for the cover are alignment posts for the buffer and t-con board.
-
Insert buffer board first
-
Insert T-Con flex into buffer board connector. Lock connector tab. Set T-Con down aligned and onto the sticky tape
-
Install all 3 cables (video, temperature sensor cable and the 3rd cable) Close the cover (make sure don't crimp the temp sensor cable) Reinstall cover screws.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。