Dell AC511 USB Cable Replacement

英語

日本語

手順 4を翻訳中

手順4

Follow this step if the wires are not connected.
Remove the old USB wiring as best as possible from the circuit board.
Try to not be too rough. If needed, use wire strippers to remove the wires.
Remember the locations of the color coded USB wires and solder each into their respective places.
Take your time. Do not add too much solder; you could potentially fry the board if you do.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。