メインコンテンツにスキップ

MacBook Air 15インチ 2024 下部ケースの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての27個のガイドに反映されます。

英語
日本語

手順 6を翻訳中

手順6
MacBook Air 15" 2023 Lower Case Replacement, Remove the lower case: 手順 0、 3の画像 1 MacBook Air 15" 2023 Lower Case Replacement, Remove the lower case: 手順 0、 3の画像 2 MacBook Air 15" 2023 Lower Case Replacement, Remove the lower case: 手順 0、 3の画像 3
Remove the lower case
  • Remove the lower case.

  • During reassembly:

  • Set the lower case in place and align the sliding tabs with the screw heads they slide over. Press down and slide the lower case toward the back edge to engage the tabs—it'll stop sliding as the tabs engage.

  • When one side is engaged, it may push the other out of alignment. Check both sides as you push, there should be no gap along the back edge.

  • Once the lower case is flush with the frame, press down firmly along the perimeter to engage the six snapping clips.

  • You'll hear and feel a distinct click as each clip snaps into place.

下部ケースを外します。

再組み立ての際には:

下部ケースを所定の位置にセットし、スライド タブを、スライドするネジの頭に合わせます。下部ケースを押し下げて後端に向かってスライドさせ、タブをかみ合わせます。タブがかみ合うと、スライドが停止します。

片側がかみ合うと、もう片側がずれる場合があります。押し込むときに両側を確認してください。後ろの端に隙間があってはなりません。

下部ケースがフレームと面一になったら、周囲に沿ってしっかりと押し下げて、6 つのスナップ型クリップを固定します。

各クリップが所定の位置にカチッとはまると、はっきりとした装着音が聞こえ、手ごたえがあります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります