Rozia HQ242 Trimmer Spring Replacement

手順 4を翻訳中

英語

日本語

手順4

Align the flat U-shaped end of the spring to the notch on the trimmer.
Gently pinch the two legs of the spring with your thumb and index finger, aligning them to point towards the front of the trimmer at a 45-degree angle, then drop it into the slot.
Once it is successfully in, carefully let go. If it falls off the notch, you will have to wedge it out and try again. This may take multiple attempts.
Make sure that the spring is securely resting on the notch, or the trimmer may not function properly!

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。