注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。
手順 1を翻訳中
手順1
Removing bottom screws
-
Using a Phillips #00 screwdriver, unscrew the following screws, and then remove the cover.
-
Using a Phillips #00 screwdriver, remove the screw. This is one of the two screws that are holding in the keyboard.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。