手順 15を翻訳中
手順15
-
Use the socket with ratchet and the extension to tighten the nut inside the peg slightly, which will allow the wheel to move slightly if needed.
-
Do the same thing on the other side.
-
Once the wheel is aligned, tighten one side slightly and then tighten the other side slightly as well.
-
Keep doing this process until the nuts are tightened enough to they won't move without the use of the ratchet.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。