Bike V-Brake Pad Replacement

ガイドに戻る

英語

日本語

前の手順次の手順

手順 2を翻訳中

手順2

Bike V-Brake Pad Replacement: 手順 0、 3の画像 1

Bike V-Brake Pad Replacement: 手順 0、 3の画像 2

Bike V-Brake Pad Replacement: 手順 0、 3の画像 3

With a 5mm Allen wrench in your left hand, slightly loosen the outer nut by turning it in a counterclockwise motion.
While loosening the outer nut with the Allen wrench counterclockwise, support the brake pad with your right hand under it to counterbalance the force.
The brake pad setup will naturally fall down after slight loosening.
Quickly put the wrench aside and fully loosen the outer nut and following washers with your left thumb and index finger.
Remember the sequence they were assembled and keep the rest of your left fingers cupped under to prevent displacement of the components if they fall.
Take out the brake pad by using your right fingers to tilt down the pad and adjacent washers, keeping the washer sequence in mind again.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。