メインコンテンツにスキップ

Xiaomi Redmi Note 10S Battery Replacement

英語
日本語

手順 3を翻訳中

手順3
Xiaomi Redmi Note 10S Battery Replacement, Remove the pull-tab: 手順 0、 3の画像 1 Xiaomi Redmi Note 10S Battery Replacement, Remove the pull-tab: 手順 0、 3の画像 2 Xiaomi Redmi Note 10S Battery Replacement, Remove the pull-tab: 手順 0、 3の画像 3
Remove the pull-tab
  • Grab the first pull-tab with a pair of blunt nose tweezers or your fingers and slowly pull it away from the battery towards the top edge of your phone.

  • Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and unstick from under the battery.

  • Don't press down on the battery. Hold the phone firmly by its sides.

  • Keep the strip flat and unwrinkled. Try to pull evenly on the whole strip, rather than pulling in the middle or on one side.

  • Pull at a low angle so the strip doesn't snag on the edge of the battery.

  • If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but do not pry under the battery.

  • If the adhesive breaks off underneath the battery and can't be retrieved, continue with the next step.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります