手順 17を翻訳中
手順17
-
After removing the screen remove the remnants of the tape from the bezel in preparation for reassembly.
-
Apply hot air to loosen the bond. Too much heat will allow spots of adhesive to stick to the bezel.
-
Use a spudge to start lifting the tape, then grip with your fingers to pull the tape up.
-
Use a tacky portion of the old tape to lift off adhesive remaining in the tape channel.
-
Use a cotton swab moistened with isopropyl alcohol to thoroughly clean any remaining tape from the tape channel.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。