メインコンテンツにスキップ

iPhone 13 Proの分解

英語
日本語

手順 2を翻訳中

手順2
iPhone 13 Pro Teardown: 手順 0、 3の画像 1 iPhone 13 Pro Teardown: 手順 0、 3の画像 2 iPhone 13 Pro Teardown: 手順 0、 3の画像 3
  • Compared to the 13 Pro Max, this lil' Pro is just right for our teardown. But it's not the size that counts, it's the insides!

  • It’s not that far-fetched to believe future iPhones will have built-in X-ray capabilities as one of their, say, 14 cameras. For now, we call upon our good friends at Creative Electron.

  • You can see a double dose of L-shaped battery, claiming every millimeter of space they can. We first saw these back when iPhones had letters for names.

  • We also see stabilizing magnets for the image sensors, tiny logic boards, and some potentially smaller Taptic Engines?

  • From the outside, this lucky number 13 looks a little swollen compared to last year's model. The camera bump has bumped up so much that the phone doesn't lay flush on a flat surface! Not that the 12 did either, though. Sigh.

  • Hopefully the micrometers of extra focal length will help justify this Carolina Squat. We'll have to wait and see!

13 Pro Maxと比べると、この小さなProモデルは分解にちょうどよいサイズです。しかしサイズが重要ではありません。大切なのはこの内側です!

未来のiPhoneに14個ものカメラが搭載されて、その一つにX線透視カメラが付いてくる時代が来るかもしれません。今の所は、友達のCreative Electronから提供されたX線画像を見てみましょう。

1mmでも多くのスペースを確保するために、両モデルにL字型バッテリーが搭載されているのがわかります。このバッテリーを最初に見たのは、iPhoneのモデル名にアルファベットが使用された時から始まりました。

イメージセンサー、小型のロジックボードと幾分小さくなったTaptic Engine用のスタビライザーマグネットが見えますが?

ラッキーナンバー13の外観をみると、去年モデルに比べて若干厚みを帯びたように見えます。カメラバンプが大きくなりすぎたため、平面上に載せるとまっすぐ水平に置くことができません。実はiPhone 12モデルも同じでした。

わずかマイクロメートルでも高くすることによって、焦点深度が深くなるならば、車高が前上がりになってしまった格好悪いキャロライナスクワットスタイルでも受け入れられるでしょう。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります