Xbox One Elite Wireless Controller Series 2 Disassembly

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語

日本語

手順 8を翻訳中

手順8

Removing the Bumper Bar

There are two tabs holding the retainer for the bar in place. Gently pop these toward you with a spudger and they'll slide up from their own tension. Note: the retainer will likely stay attached to the bumper assembly, but must be removed from the main controller assembly before proceeding to the next step.
Once the retainer has been released, again use the spudger to gently pry the buttons outward and upward (in the direction of the arrow in the image) which will release them from another clip. Do this on both sides.
As user Shane Muir has pointed out, please be careful due to the fragility of the retainer in this step. It can easily be broken.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。