E-bike Disassembly of frame for painting (model: HNF UD1)

ガイドに戻る

英語

日本語

前の手順次の手順

手順 7を翻訳中

手順7

E-bike Disassembly of frame for painting (model: HNF UD1), Remove Chain ring: 手順 0、 3の画像 1

E-bike Disassembly of frame for painting (model: HNF UD1), Remove Chain ring: 手順 0、 3の画像 2

E-bike Disassembly of frame for painting (model: HNF UD1), Remove Chain ring: 手順 0、 3の画像 3

Remove Chain ring

Loosen the back wheel bolts with the 15mm wrench on both sides of the rear axel and move the rear wheel out vertically for a few centimeters
Thus no tension is on the belt
slide the belt and chain ring off the drive train axel
Do not put too big force on belt (bending etc)
Slide the remaining double metal ring off
Slide the underlying black sealing ring off

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。