E-bike Disassembly of frame for painting (model: HNF UD1)

ガイドに戻る

英語

日本語

前の手順次の手順

手順 41を翻訳中

手順41

E-bike Disassembly of frame for painting (model: HNF UD1), Remove The Rear Fender from the frame: 手順 0、 3の画像 1

E-bike Disassembly of frame for painting (model: HNF UD1), Remove The Rear Fender from the frame: 手順 0、 3の画像 2

E-bike Disassembly of frame for painting (model: HNF UD1), Remove The Rear Fender from the frame: 手順 0、 3の画像 3

Remove The Rear Fender from the frame

Remove the two screws holding it to the frame's middle (back frame's triangle's corners)
There are two (1-1) black plastic/rubber plates between the fender and the frame on the screws
In total the bike rack and rear fender are connected with 4 screws to the frame

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。