E-bike Disassembly of frame for painting (model: HNF UD1)

ガイドに戻る

英語

日本語

前の手順次の手順

手順 16を翻訳中

手順16

E-bike Disassembly of frame for painting (model: HNF UD1), Remove plug and cable of back lamp: 手順 0、 3の画像 1

E-bike Disassembly of frame for painting (model: HNF UD1), Remove plug and cable of back lamp: 手順 0、 3の画像 2

E-bike Disassembly of frame for painting (model: HNF UD1), Remove plug and cable of back lamp: 手順 0、 3の画像 3

Remove plug and cable of back lamp

Located in 3. place from the left is the back lamp's cable and plug
It runs directly to the back of the bike and exits the drive units frame part on a hole around the kickstand just below the rear fender
The cable runs through the inner side of the rear fender and ends in the back lamp

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。