E-bike Disassembly of frame for painting (model: HNF UD1)

ガイドに戻る

英語

日本語

前の手順次の手順

手順 28を翻訳中

手順28

E-bike Disassembly of frame for painting (model: HNF UD1): 手順 0、 3の画像 1

E-bike Disassembly of frame for painting (model: HNF UD1): 手順 0、 3の画像 2

E-bike Disassembly of frame for painting (model: HNF UD1): 手順 0、 3の画像 3

With the help of a T25 screwdriver, remove the two screws holding the upper (locking mechanism) to the frame
When both screws are removed, the lock can be lifted (removed)
The plus is on the upper side
Underlying cable holder plastic can also be lifted
the higher fences show to the upper side, also the narrower side is on the top
There may be a plate under the lower screw between the frame and the lock (10)
But could also be below the upper one (04)

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。