Logitech Mouse G302 Disassembly

手順 1を翻訳中

英語

日本語

手順1

Open the case

Flip the mouse over to gain access to the bottom.
Using a scalpel, pick, or similar tool, peel away the slide pads on the bottom of the mouse in order to expose the three screws.
Using a PH0 / Phillips #0 driver, remove the 3 screws shown in red.
Peel away as little of the pads as possible, in order to preserve the adhesive on their undersides.
Gently separate the two halves of the case. Light prying may be required.
For PCB removal : remove 3 PH0 screws from PCB surface. The whole PCB can be taken out for inspection and repair after the screws are removed.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。