手順 4を翻訳中
手順4
Clean clean clean
-
I use the point of the tweezers to brush away any dirt from the center contact inside the button housing.
-
I do the same with the back side of the metal disc.
-
Finally, I use an air can to blow away any loose debris from inside the button housing. Be careful not to blow away the button plunger.
-
Sometimes, you might see an interior with significant corrosion. You may need to use a cotton swab with isopropyl alcohol or similar fluid to clean the contacts and disc. Just make sure the parts are dry before reassembling.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。