DJI Mavic Pro Front Arm Assembly Replacement

英語

日本語

手順 5を翻訳中

手順5

Lift the back end of the cover
The cover is connected to the body by a cable. Don't open the cover all the way until this cable is unplugged!
Unplug the 6-pin GPS connector, then pry along the edges to release the plastic clips holding the top down
Remove the cover
The clips at the nose of the drone require some extra pressure to release

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。