メインコンテンツにスキップ

Samsung Galaxy A51 ディスプレイ交換

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 3を翻訳中

手順3
Samsung Galaxy A51 Screen Replacement: 手順 0、 3の画像 1 Samsung Galaxy A51 Screen Replacement: 手順 0、 3の画像 2 Samsung Galaxy A51 Screen Replacement: 手順 0、 3の画像 3
  • Once the screen is warm to the touch, apply a suction cup to the upper edge of the phone.

  • If the screen is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Insert an opening pick in the gap and start to cut the adhesive by sliding it to the top right corner.

スクリーンが熱くて触れない程度まで温まったら、スマートフォン上部の縁に吸盤カップを装着します。

スクリーンがひび割れている場合、吸盤が上手く装着しないことがあります。強力なテープで持ち上げてみたり、瞬間接着剤で吸盤を固定し、硬化させると上手くいきます。

隙間にオープニングピックを差し込み、右上にスライドさせて接着剤を切り始めます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります