手順 5を翻訳中
手順5
-
Take up the slack on the shifter cable with pliers and tighten down the bolt on the retaining clamp.
-
Thread the shift cable back into the derailleur, pull it tight and tighten the anchor bolt so the cable flattens. Then find a bare stretch of cable and give it a good pull to make sure the cable is seated and has no slack. Then loosen the cable, pull it tight again and re-tighten it.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。