Motorola Droid Turbo 2 Rear Cover Adhesive Guide

ガイドに戻る

英語

日本語

手順 1を翻訳中

手順1

Motorola Droid Turbo 2 Rear Cover Adhesive Guide: 手順 0、 3の画像 1

Motorola Droid Turbo 2 Rear Cover Adhesive Guide: 手順 0、 3の画像 2

Motorola Droid Turbo 2 Rear Cover Adhesive Guide: 手順 0、 3の画像 3

Prepare the phone frame surface by removing all traces of adhesive.
Use tweezers to pull adhesive chunks off. Use the opening tool to scrape residue off. You can use high concentration (over 90%) isopropyl alcohol to help dissolve residue.
Be careful not to damage the wireless charging coil when scraping around it.
If you are re-using the rear cover, prepare the inner surface by removing all traces of adhesive from it.
Do not attempt to remove the rectangular plastic liner near the bottom of the cover, but do scrape off all adhesive on it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。