手順 6を翻訳中
手順6
-
Before installing or gluing down any new components, remove any remaining adhesive residue from your device.
-
Peel off larger pieces of adhesive using tweezers or gloved fingers.
-
Scrape away any remaining adhesive with a plastic tool, and clean the underlying areas with adhesive remover or isopropyl alcohol. Wipe in one direction, not back and forth, until all the adhesive residue is gone.
-
When your device is clean and dry, go ahead and install your new part and reassemble your device.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。