How to Use iFixit Adhesive Remover

英語

日本語

手順 4を翻訳中

手順4

Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component.
A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks.
Wait 2-3 minutes for the liquid adhesive remover to penetrate and soften the adhesive before you proceed to the next step.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。