手順 3を翻訳中
手順3
-
Once the display is warm to the touch, apply a suction cup to the upper edge of the phone.
-
Lift on the suction cup, and insert an opening pick under the display assembly.
-
Start to slide the opening pick along the upper edge of the phone to cut the adhesive. Leave an opening pick at the corner to prevent the adhesive from resealing.
-
Continue to slide the tip of the opening pick along the side towards the bottom of the phone to cut the adhesive.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。