ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。
手順 1を翻訳中
手順1
-
You should now see the EMI filter right in the middle of the device (although held in by a few other components).
-
Follow the wires coming out of the bottom of the Power adapter off to the left.
-
Take the tweezers and remove the piece of tape holding the wires to the casing.
-
There is only one connector that needs to be taken out (even though there are two right next to each other!).
-
Grab the connector from the bottom and pull it carefully from its corresponding socket.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。