Huawei Mate 10 Pro Screen and Digitizer Replacement

英語

日本語

手順 2を翻訳中

手順2

If your display isn't already broken, it is likely to break during this process. You might want to protect your hands and eyes from glass shards.
Push a spudger against the back of the display through the cutout in the midframe, where the charging port was located, to create a gap between the display and the frame.
The adhesive is really sticky so this can be a lengthy and difficult procedure. Take care not to damage any other components while doing so.
Insert the tip of an opening pick into the gap you just created.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。