Dell Vostro 1710 Hard Drive Replacement

英語

日本語

手順 2を翻訳中

手順2

Removing the Hard Drive Cable

Remove the three screws that secure the hard drive to the computer.
One screw is attached to a metal tab on the metal base of the hard drive, and the other two screws are attached to the metal base.
Disconnect the hard drive cable connector from the motherboard.
Pull the mylar tab to release the hard drive.
Lift the hard drive and the hard drive cable out of the computer. You may find it easier to lift the hard drive starting from the side located opposite from the hard drive's connection to the hard drive cable.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。