注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。
手順 1を翻訳中
手順1
Remove Bottom Cover / Shell
-
Remove the 7 screws from the back cover with a Phillips #0 screwdriver
-
Once all 7 screws have been removed, you can start to pry apart the back cover with your Plastic Blade or your fingers. (See pic)
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。