Remove the cleaning station.

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

ガイドに戻る

英語

日本語

手順 2を翻訳中

手順2

Remove the cleaning station., Remove the Cleaning Station.: 手順 0、 2の画像 1

Remove the cleaning station., Remove the Cleaning Station.: 手順 0、 2の画像 2

Remove the Cleaning Station.

Undo the single screw attaching the cleaning station to the carriage support.
If you have not already done so, put on your gloves now. The cleaning station is full of ink, and you can't handle it without getting ink on you.
Release the air lines from the clips in the cleaning station.
Detach the smaller hose from the T joint.
Pull up on the carriage support. This should give you enough room to work the cleaning station out of the printer.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。