手順2に変更
- Chase Mamateyによって編集
承認済みの編集 : Chase Mamatey
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Open the display connector by lifting on the brown latch with a plastic spudger or a finger until it is in a vertical position. |
|---|---|
| + | [* black] Open the display connector by lifting on the brown latch with a plastic opening tool or a finger until it is in a vertical position. |
| + | [* icon_caution] Failing to do this correctly could result in damage to the cable and/or connector. |
| [* black] Gently pull on the display ribbon cable and it should easily slide out of the connecter. | |
| + | [* icon_note] If the connector is properly open, disconnecting the ribbon cable should require little to no force. |