手順4に変更
- Jeff Suovanenによって編集
承認済みの編集 : Jeff Suovanen
- 前
- 後
- 変更なし
手順ライン
| [* black] Disconnect the two ribbon cables as shown in picture one. | |
| - | [* icon_note] To disconnect a ribbon cable, use the metal spudger to lift the black tab then pull the ribbon out. This works the same for all ribbon cables. |
| + | [* icon_caution] Avoid using metal pry tools, as shown in the photo, on internal electronic components, as it can cause a short and damage the device. Use an ESD-safe tool such as a standard nylon spudger. |
| + | [* icon_note] To disconnect a ribbon cable, use a spudger to lift the black tab then pull the ribbon out. This works the same for all ribbon cables. |