修理を始めるには コミュニティ ストア

手順25に変更

- Sandra Hillerによって編集

承認済みの編集 : Sandra Hiller

前
後
変更なし

手順ライン

[title] Reinstall LCD
[* black] Make sure the diffuser sheet surface is clean and preferably kept clean during disassembly and no need to touch the surface. If need to clean, use mild proper cleaning solution (30% ISO, 70% distilled water mix) and micro fiber to wipe gently clean. Anything on the surface will be trapped under the LCD
-[* black] Hang the edge where buffer boards will go over an edge. Suction cup and install the LCD by aligning the 2 corners opposite of the buffer board first. Gently sit LCD down into the plastic frame. Make sure it sits properly in the plastic frame guides
+[* black] Position everything so that the buffer board is guided over an edge and remains freely movable. Pick up the LCD with the suction cups and install it by first aligning it in the two corners opposite the buffer board. Then carefully place the LCD in the plastic frame, making sure that it is properly seated in the guides.