手順10に変更
- Arthur Shiによって編集
承認済みの編集 : Arthur Shi
- 前
- 後
- 変更なし
手順ライン
| [title] Remove the housing | |
| [* black] Set the device on its side. | |
| [* black] Lift the housing half away from the body. | |
| - | [* icon_note] If |
| + | [* icon_note] If the housing half does not separate, check to make sure you removed all the body screws. |
| [* black] Remove the housing. | |
| [* icon_note] Screws may get stuck inside the plastic housing. Be careful not to lose any screws. |