手順1に変更
- Arthur Shiによって編集
承認済みの編集 : Arthur Shi
- 前
- 後
- 変更なし
手順ライン
| [title] Jump Start | |
| [* black] This miserable design actually sends line voltage up the hose to the switch, and back down again. | |
| [* black] If your vacuum is completely dead silent, chances are one of the wires in the hose broke. | |
| [* black] To start the motor without the hose, get insulated clip leads, apply power, and short the left and right terminals together. If the vacuum starts, you're on the right track. | |
| + | [* icon_caution] ***WARNING: Be extremely careful not to touch the exposed contacts when the vacuum is powered in this state. *** |
| [* black] You can also place a small bit of #14 or #12 stranded insulated wire between the two terminals, leaving enough space for plugging in the regular wand. You won't have switch control, but the thing will work. |