手順10に変更
- Jeff Suovanenによって編集
承認済みの編集 : Jeff Suovanen
- 前
- 後
- 変更なし
手順ライン
| [title] Prepare the replacement screen | |
| - | [* icon_ |
| - | [* black] If your replacement screen came with the digitizer cable disconnected, |
| - | [* black] Use a spudger to flip up digitizer cable socket's locking bar, located on the back of the screen near the top right corner. |
| - | [* black] Peel the small square plastic liner under the digitizer cable to expose the adhesive. |
| + | [* icon_reminder] This step shows how to prepare your replacement screen for installation. |
| + | [* black] If your replacement screen came with the digitizer cable disconnected, be sure to connect it before installation: |
| + | [* black] Use a spudger to flip up the digitizer cable ZIF socket's locking bar, located on the back of the screen near the top right corner. |
| + | [* black] Peel off the small square plastic liner under the digitizer cable to expose the adhesive. |
| [* black] Press the cable down against the back of the screen. | |
| [* black] Carefully feed the cable into the digitizer cable socket until the white bar printed on the cable is barely visible. | |
| [* black] Flip the socket's locking bar down to secure the cable in place. | |
| [* black] Peel all plastic liners from the replacement screen. |