手順6に変更
- Arthur Shiによって編集
承認済みの編集 : Arthur Shi
- 前
- 後
- 変更なし
手順ライン
| [* black] Once the battery is sufficiently loosened from the frame, slowly lift it out. | |
| [* black] Remove the battery. | |
| [* icon_reminder] To install a replacement battery: | |
| [* black] Apply new adhesive to the phone frame. | |
| [* black] Gently lay the battery pack in the phone. | |
| [* black] ''Temporarily'' reconnect the battery to the motherboard to ensure that the battery is properly aligned. | |
| [* black] Once the battery is aligned, press it firmly in place with your fingers. Disconnect the battery from the motherboard, and resume re-assembly. | |
| + | [* icon_note] For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%. |