手順6に変更
- Jeff Suovanenによって編集
承認済みの編集 : Jeff Suovanen
- 前
- 後
- 変更なし
手順ライン
| + | [* black] Before installing or gluing down any new components, remove any remaining adhesive residue from your device. |
|---|---|
| + | [* black] Peel off larger pieces of adhesive using tweezers or gloved fingers. |
| + | [* black] Scrape away any remaining adhesive with a plastic tool, and clean the underlying areas with adhesive remover or isopropyl alcohol. Wipe in one direction, not back and forth, until all the adhesive residue is gone. |
| + | [* icon_note] This can take quite a bit of work, so be patient. |
| + | [* black] When your device is clean and dry, go ahead and install your new part and reassemble your device. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加