手順4に変更
- Jeff Suovanenによって編集
承認済みの編集 : Jeff Suovanen
- 前
- 後
- 変更なし
手順ライン
+ | [* black] Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component. |
---|---|
+ | [* icon_note] A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks. |
+ | [* icon_note] Wait 2-3 minutes for the liquid adhesive remover to penetrate and soften the adhesive before you proceed to the next step. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加