手順18に変更
- Jeff Suovanenによって編集
承認済みの編集 : Jeff Suovanen
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Another time we've been pleased to early and it turns out that the front facing camere sits very tight in the mid frame of the Mate 10 Pro. It wiggles a little bit but we haven't found a way to remove it yet. |
|---|---|
| - | [* icon_note] Nevertheless it has 8 MP and a f/2.0 aperture! Huwei says the Mate 10 Pro evokes a professional bokeh effect by shifting the focal point onto the subject of the photograph, for picture-perfect portraits and selfies. |
| - | [* black] Getting in between the display and the frame seems to be an impossible task. No heating nor pulling nor prying was of any success. The front panel is glued tight and built in dimension so that there is literally no gap. |
| + | [* black] When it comes to the front-facing camera, we're not quite so pleased—it's very tightly secured in the midframe of the Mate 10 Pro. It wiggles a little, but removing it cleanly is going to be a challenge. |
| + | [* icon_note] Nevertheless, it packs 8 MP and a f/2.0 aperture. Huawei says the Mate 10 Pro evokes a professional bokeh effect by shifting the focal point onto the subject of the photograph, for more dramatic portraits and selfies. |
| + | [* black] Getting in between the display and the frame looks to be a near-impossible task. No amount of heating, pulling, or prying saw any success. The front panel is glued tight and the tolerances are so small that there is simply no gap. |
| + | [* black] If you break this display, you could end up replacing the entire midframe assembly along with it. |