メインコンテンツにスキップ

Zoomer Dino Boomer Nose Sensor Replacement

必要な工具と部品

  1. Zoomer Dino Boomer Nose Sensor Replacement, Nose Sensor: 手順 1、 2の画像 1 Zoomer Dino Boomer Nose Sensor Replacement, Nose Sensor: 手順 1、 2の画像 2
    • Unscrew the two 7.5 mm Phillips #0 screws at the base of the neck.

    • Remove the two 7.2 mm Phillips #0 screws above these at the base of the mouth.

  2. Zoomer Dino Boomer Nose Sensor Replacement: 手順 2、 2の画像 1 Zoomer Dino Boomer Nose Sensor Replacement: 手順 2、 2の画像 2
    • Use the spudger to pry Zoomer Dino Boomer's lower jaw from its mouth.

  3. Zoomer Dino Boomer Nose Sensor Replacement: 手順 3、 2の画像 1 Zoomer Dino Boomer Nose Sensor Replacement: 手順 3、 2の画像 2
    • Remove the roof of Zoomer Dino Boomer's mouth by unscrewing the 7.5 mm Phillips #0 screw.

  4. Zoomer Dino Boomer Nose Sensor Replacement: 手順 4、 2の画像 1 Zoomer Dino Boomer Nose Sensor Replacement: 手順 4、 2の画像 2
    • Carefully push the sensors out of the nose socket with your fingers.

  5. Zoomer Dino Boomer Nose Sensor Replacement: 手順 5、 3の画像 1 Zoomer Dino Boomer Nose Sensor Replacement: 手順 5、 3の画像 2 Zoomer Dino Boomer Nose Sensor Replacement: 手順 5、 3の画像 3
    • Use a soldering iron to remove the wires from the sensor chip by melting the metal joints on the chip.

    • Use the tweezers to remove the wires as you are soldering them.

    • Do not touch any parts of Zoomer Dino Boomer or yourself when using the soldering iron. The soldering iron will be very hot.

    • When reassembling, extra solder may be required to reconnect the wires with the circuit board.

  6. Zoomer Dino Boomer Nose Sensor Replacement: 手順 6、 1の画像 1
    • Remove and replace the nose sensor.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Lauren Mannix

メンバー登録日: 08/29/15

398 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team 16-1, Wollert Fall 2015 USF Tampa, Team 16-1, Wollert Fall 2015人のメンバー

USFT-WOLLERT-F15S16G1

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 12

今までの合計 1,338