メインコンテンツにスキップ

はじめに

When Emil won't work well, deoxidize the springs.

Emil is a talking baby-laptop which works with cards, that have holes which trigger the programs.

When the spring sensors are oxidized, the cards can't work and the programs don't start.

So you must deoxidize the contacts at the springs.

パーツ

パーツは指定されていません。

  1. First you must detach thes round yellow plugs which cover the screws. There are 6 short screws around the "display" ...and two longer screws under that "display"
    • First you must detach thes round yellow plugs which cover the screws.

    • There are 6 short screws around the "display"

    • ...and two longer screws under that "display"

  2. Here a view of these screws
    • Here a view of these screws

  3. Now just pull it to open. Down there is a spring and a plastic part, look at the pictures Down there is a spring and a plastic part, look at the pictures
    • Now just pull it to open.

    • Down there is a spring and a plastic part, look at the pictures

  4. There you have these contact springs. There you have these contact springs. There you have these contact springs.
    • There you have these contact springs.

  5. The springs are deoxidized with a electronics-cleaner-spray. After reassembling, Emil nnow knows every card and can talk and sing.
    • The springs are deoxidized with a electronics-cleaner-spray.

    • After reassembling, Emil nnow knows every card and can talk and sing.

    • Done. :)

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Schwarzstein

メンバー登録日: 2013年07月15日

2,334 ポイント

14のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 15

今までの合計 209