はじめに
This video demonstrates how to replace the feet, D-bucket (or enclosure), battery, SSD, Surflink port assembly, audio jack, display, motherboard, USB-C port, C-cover in your Microsoft Surface Laptop Studio.
If you're replacing the D-bucket, perform the battery Surface Diagnostic Tests to determine if you also need to replace the battery.
Please refer to the official Microsoft Service Guide for step-by-step instructions.
Chapters
00:00 Introduction and Prerequisite Steps
Disassembly
02:03 Non-Skid Feet
02:22 D-Bucket and Battery
02:56 rSSD
03:48 Surflink
04:19 Audio Jack
04:38 AB Cover Display Module
05:41 Motherboard
06:50 USB-C Port
07:08 C-Cover
Reassembly
07:34 C-Cover
07:50 USB-C Port
08:03 Motherboard
09:18 AB Cover Display Module
10:34 Audio Jack
10:45 Surflink
11:24 rSSD
11:39 D-Bucket and Battery
12:27 Non-Skid Feet
必要な工具と部品
ビデオインストラクション
After reassembly, test your repair with Microsoft's Surface Diagnostic Toolkit to make sure your laptop works as expected.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
After reassembly, test your repair with Microsoft's Surface Diagnostic Toolkit to make sure your laptop works as expected.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
0 件のコメント