はじめに

The side speakers on the Sonos Playbase are necessary to create simulated surround sound. If certain channels are missing or low quality, the side speakers may need replacement.

    • Turn the Playbase upside down so that the "Sonos Playbase" imprint is face up.

    • Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.

    • Melt the adhesive with an iOpener for ease of opening

    • Use a Metal Spudger if the plastic spudgers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

    • Remove the fourteen 11mm T-10 screws by turning counter-clockwise.

    • Remove the seven 44mm T-20 screws by turning counter-clockwise.

    • Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.

    • Record where each screw belongs for easier reassembly.

    • Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.

    • Use a metal spudger if plastic openers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

    • Remove the 24 mm T-10 screw by turning counter clockwise.

    • Remove the 41 mm T-55 screw by turning counter clockwise.

    • Remove the speaker.

まとめ

To reassemble your device, follow these instructions in reverse order.

James Andrews

メンバー登録日: 2018年10月08日

421 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team S17-G2, White Fall 2018 Cal Poly, Team S17-G2, White Fall 2018人のメンバー

CPSU-WHITE-F18S17G2

4 メンバー

8のガイドは作成済み

統計データを表示:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 19

今までの合計 59